quality

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bobcatgt

New Member
Joined
Jun 19, 2008
Messages
23
Reaction score
0
Location
nesbit
just wanted to know if anyone is running a 6inch rough country lift for their tahoe or yukon. they are a good bit cheaper and still seem to have a stirdy structure . if so let me know what you think and what tire and rim size u are running. i know that 35s will fit i just want to hear from someone:mad3::mad3:
 

992door

Full Access Member
Joined
Dec 27, 2007
Messages
388
Reaction score
1
Location
NC
I havent really heard to much bad about them. I think most people have been happy with it.
 
Last edited:

Blackbeauty99

New Member
Joined
Oct 4, 2008
Messages
18
Reaction score
0
Location
Wilmington, NC
I have a Buddy with a early 90 model tahoe on a 6 inch Dick Cepek lift, and he is running 38 narrow boggers, turns and drives just fine, it does rub when going 4-wheeling but not much, Im on a 4.5 superlift with 35x12.50's and i dont 4-wheel so they dont rub at all, i had a Rough Country on my 88 blazer but that was a stright axle, but it was sturdy put up alot when 4-wheeling..
 
Top