question about leveling kit...

Ok, I want to install a fabtech 2" leveling kit, suspension maxx 1" rear spring lift, and I want to keep the stock 20's and throw some 33"x12.5x20 mud grapplers on them. Does anyone know if this will work or not? Thanks.

Bobby

I think you would need a lift to fit those (12.5" would be too wide). Also on the stock 20 wheel, I believe the tire size should be metric. Check Gonzo's truck.

With a level kit you can fit 285s no problem. Maybe the site should have typical lifts and tires as a sticky...

Searched - InTruckDesign installed these

"specs are CCM 2.5 spacer up front, Suspension Maxx 1" spacer in back, Nitto TG's 305/55-20(33x12.5), American Racing ATX Vice in Teflon 20x8.5 18mm offset 5.5" backspace..."

Hope this helps.