led low beams installed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1sik_hoe

New Member
Joined
Feb 25, 2012
Messages
6
Reaction score
0
Installed the led low beams and it's a huge difference!
 

Attachments

  • 20150522_051815.jpg
    20150522_051815.jpg
    34.5 KB · Views: 26
  • 20150522_051759.jpg
    20150522_051759.jpg
    32.6 KB · Views: 21

1sik_hoe

New Member
Joined
Feb 25, 2012
Messages
6
Reaction score
0
Thank you, they were off amazon, there are better ones out now but I'm happy with them, didnt work right off the bat kept turning off, installed resistors and that didn't work, then did led decoders and that did the trick all is good now. Install went good pretty much like installing hids
 

Vista Cruiser 69

New Member
Joined
Sep 29, 2014
Messages
39
Reaction score
0
Location
North Germany
Hi Guys,

can't imagine that this can work anyhow. Understand you have two very bright lamps when looking into them - if that was the idea - then hey. But a reflector of a headlamp is a result of quite some engineering and it is designed to reflect the light from a very small hot spot in the center of the bulb and - not from a heap of single SMD sources scattered around a finger thick cylinder. This must end up with a spotty light/dark area in front of your car and any oncoming driver approaching you may spit... LEDs work for a lot of applications but surely not for headlamps as aftermarekt replacement
 

leafman60

Member
Joined
Jan 26, 2008
Messages
38
Reaction score
0
Did this vehicle have Daytime Running Lights with the headlamps or with the factory LED strip? Was this an LTZ model?
 

leafman60

Member
Joined
Jan 26, 2008
Messages
38
Reaction score
0
Hi Guys,

can't imagine that this can work anyhow. Understand you have two very bright lamps when looking into them - if that was the idea - then hey. But a reflector of a headlamp is a result of quite some engineering and it is designed to reflect the light from a very small hot spot in the center of the bulb and - not from a heap of single SMD sources scattered around a finger thick cylinder. This must end up with a spotty light/dark area in front of your car and any oncoming driver approaching you may spit... LEDs work for a lot of applications but surely not for headlamps as aftermarekt replacement

Yes, LED conversions have come a long way. Most use the CREE LEDS that utilize your stock reflector or projector to spread the huge amount of light they produce.
 
Top