Question about dropping Denali
- Thread starter cwt4
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
preston
New Member
Yes, you can get a 3/5 drop. A bunch of companies make them, I have a 2/3 McGaughy's kit and I know they make the 3/5 kit. Check out their website, here is a link http://www.mcgaughys.com/tahoe.html
PS: I am selling my 2/3 kit if you are interested.
PS: I am selling my 2/3 kit if you are interested.
preston
New Member
You must have you PM option blocked as it won't give me the option to PM you.
Anyway, I was looking to get $350+shipping for the kit. It is the 2 inch drop spindles for the front and 3 inch drop coils for the rear. The spindles have never been installed so they are brand new, the coils are currently on the car but will be off the car tomorrow.
Anyway, I was looking to get $350+shipping for the kit. It is the 2 inch drop spindles for the front and 3 inch drop coils for the rear. The spindles have never been installed so they are brand new, the coils are currently on the car but will be off the car tomorrow.
preston
New Member
Not mine, but here is a before and after picture of a Denali on 26's with a 2" Eibach kit on it, which as mentioned by CIATAHOE on the forum is really a 2/2.75 drop. Pretty much the same as the Mcgaughy's. Don't think you can go much lower with 26's without major rubbing.
