Front Bumper Question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AAHTahoe

Full Access Member
Joined
Feb 22, 2007
Messages
74
Reaction score
0
Location
Tempe, AZ
I want to put a plate on my front bumper similar to what others have used and need to know how to do it. My front bumper does not have the screws and plastic bolts like the ones in the rear for attaching a license plate. There are two indentations but no holes for screws. Has anyone else had this and attached a plate without screwing up the finish on the front bumper?

TIA ... Allen
 

rat55chevy

New Member
Joined
Apr 9, 2007
Messages
2
Reaction score
0
I used a couple of license plate screws without the pastic inserts. I drilled a small pilot hole at each indentation and attached the plate holder, cover and plate. No issues thus far.
 

Andy4639

Full Access Member
Joined
Apr 12, 2007
Messages
77
Reaction score
0
Location
Liberty SC & Myrtle Beach SC
Front bumper tag

I used S/S screws and just screwed them into the bumper then used the little metal keepers to secure them on the back side.

DSC00234.JPG
 

73shark

Full Access Member
Joined
Apr 8, 2007
Messages
1,380
Reaction score
0
Location
KC, MO area
I used 3M double backed tape.
 

Attachments

  • 07 RF qtr.jpg
    07 RF qtr.jpg
    113.3 KB · Views: 21
Top