Search results

  1. JKmotorsports

    Engine code

    A bad intake gasket can cause a lean condition and rough idle, especially when cold. Check the bank 2 (passenger side) gasket for any vacuum leaks while the engine is cold.
  2. JKmotorsports

    Fuel pump relay question

    If you are having fuel delivery issues, more than likely the pump is getting weak or your filter is clogged. As stated earlier, the fuel pump relay will have the pump in either a on or off state, nothing in between.
  3. JKmotorsports

    02 tahoe bad knock sensor

    Knock sensors (there are two) are located on the lifter valley cover underneath the intake manifold. You'll need to remove the entire manifold/plenum/fuel rail assembly to access them.
  4. JKmotorsports

    Oh well

    Here's an idea: Let's have one person from each generation be in charge of the calendar entry threads for that section. We'll set a couple simple rules, a deadline, and then have a poll to see which trucks have the most votes to go into the "best of the best", all generation calendar. We'll...
  5. JKmotorsports

    Clifford Matrix 3.5 RSX

    I would have the additional sensors/options added at the same time of the install, for the same reasons OmarR stated, and because in most cases, it's less trouble for the installer. I hate going back into someone else's install and adding stuff. Not every installer does everything the same way...
  6. JKmotorsports

    Need help deciding; HD or cowl?

    I just had my new hood set aside for me ready to pick up on Monday. Can't wait. Thanks again guys:thumbsup:
  7. JKmotorsports

    Need help deciding; HD or cowl?

    I completely forgot about the San Antonio location. That should save me a decent chunk of change for shipping. Thanks for all the tips and suggestions guys. I'll have some new pictures up as soon as I get her back and all cleaned up.
  8. JKmotorsports

    Oh well

    Not sure how, who, or why the threads were merged. I honestly like the idea of a dedicated calendar for each generation, and then maybe one with the best of all three body styles. But it's strictly up to you guys.
  9. JKmotorsports

    Need help deciding; HD or cowl?

    I was leaning towards the HD in the first place, so that's what I'm sticking with. I can't seem to find a cowl hood that looks just right on these trucks. Besides, there's too many trucks running around here that have the cowl hoods already. So, HD it is. I'm ordering tonight. When I get my...
  10. JKmotorsports

    Lets see your drop on 24's or lifted on 35's

    Tybrene Motorsports. Good customer service, at least my experience was.
  11. JKmotorsports

    Lets see your drop on 24's or lifted on 35's

    I'm running 305/35/24. The ride is stiffer than before because of the sidewall and shorter springs, but not bad enough that my wife doesn't complain. I like it because it handles much better with the stiffer springs, less sidewall flex, and lower CG. I noticed right away when I put the wheels...
  12. JKmotorsports

    Lets see your drop on 24's or lifted on 35's

    ^^^ That's a nice truck^^^. Sorry I can't offer any advice on which way to go. I like both when done right. These trucks look good both lifted and dropped, so I guess you can't go wrong either way.
  13. JKmotorsports

    Need help deciding; HD or cowl?

    I'm trying to decide on which hood to go with, but having a hard time. I like both. Only thing about going with a cowl is that it's more common. I'm leaning a bit towards the HD, but need a little more persuasion. What do you guys think? I need to decide and order by Thursday morning. Cowl...
  14. JKmotorsports

    Anyone know who makes this kit?

    I used to hate when it snowed a lot. But since I moved down here and don't see it anymore, I actually miss it. The longer warm weather here is nice though, especially with all the lakes and water parks, etc. But the humidity kicks your @ss pretty bad, at least mine. Anyway, good luck on the...
  15. JKmotorsports

    Painting Shocks?

    With my 3/5, my rear shocks are definitely noticeable from the rear. You can see them from the sides as well through the wheels. They're white though, so I'm sure that makes it a bit more noticeable.
  16. JKmotorsports

    Anyone know who makes this kit?

    I miss the snow from Indiana. I used to live in Logansport, Zionsville, and Indianapolis back when I was a kid. Moved to Tx in 86 and seen snow only about four times, and only once was it enough to actually stick for a couple hours. Anyway, I haven't seen that kit before. Doesn't look bad, but I...
  17. JKmotorsports

    ebay stuff

    I've bought and sold tons of stuff thru Ebay since I signed up back in '01; graphics cards, posters, car parts, r/c parts, home decor, and on and on. I try to stick with new stuff or used items that don't tend to wear, and try to stay away from the extremely cheap, low quality or knockoff items...
  18. JKmotorsports

    Anyone have experience with Ifinity Kappa Perfect components?

    I'm running two sets of Kappa components in my front doors in my 'hoe and a set in my CTS. I think they're great speakers for the money. There are better speakers out there (Rainbow, Bostons, a/d/s, Focal, etc), but for the money, it's hard to beat the Kappas imho, and I've been installing for...
  19. JKmotorsports

    to those who have a BB tune

    Right now all I have is an S&B intake and a 10 series single-chamber Flowmaster. I also did away with the engine driven fan which helped some. What gears do you have? I'm running 3.73s in the rear. Justin mentioned something about the intake setup I have working very well, being as there was...
  20. JKmotorsports

    Someone hit the truck..again

    Yea, it sucks. I'm going to have to go through insurance on this one. I don't even want to look at it to take pictures. My wife took the truck out lastnight with her boss and a couple other people from work. They went out to dinner and to have a few drinks and I guess someone else there had a...
Top