Search results

I believe my tahoe is unthreaded as well. It is held on by 4 bolts correct? Thank you for your help. Hopefully this fixes it because its driving me nuts. and the last thing i want is my front end to lock up.

Now would it be smart to replace the wheel hub assy or just the bearing? I didnt think you could do just the bearing but ive seen some for sale now. My 1999 Tahoe has 107K on it. about 40k are from being trailered behind an RV though. So i havent had alot of common problems but this is one...

Is there any way to find out which side it is before going through all of that. I know when i turn right in big turns i seem to hear it more. That would mean it is the left front tire correct?

About a week ago i started hearing this sound that is like a whorling sound. It gets faster as i get faster. When im going about 20 or less it takes a few seconds before i hear it. When im going faster than that i hear it constantly like its rotating. I noticed also when i turn right in big...

I had this same problem. Fuel pump was the problem. How much gas do you usually have? If you run less than a quarter of a tank you risk overheating the pump. If you have power and checked everything cheap like battery, alternator, and fuses. Chances are its your fuel pump which is about...

All you have to do is figure out the total ride height and you will know how large of tire and wheel combination you can go. http://www.tirerack.com/tires/tiretech/techpage.jsp?techid=46 I run 305/40/23 and dont rub. Just follow the website and you can figure out your ride height and if you...

Its not worth it. The way to gain power is to get more air into the combustion chamber. The more air and the better the air to fuel mixture the more combustion you will recieve. These items do nothing to add air. A intake however would allow more air in than a stock intake allowing for more...

So if your looking about $350 for these cats. Do you just look for a dual outlet exhaust for the rest of the pipes? Which cheapest is roughly another $300. That sound about right? Total for the cats above and the rest of the pipes about $650? I was just going to do a cat back exhaust but...

http://www.tsmmfg.com/General_Motors_truck_rear_axles.htm They hooked me up. It was basically the same as the suburban model. I dont know anything about cadillac rotors and calipers though. I bought a new set of cross drilled 10"

Go to autozone. You can get them in packs of like 10 for like 2 dollars. Its crazy. I bought a bunch just incase. I tear my doors off all the time just messing with speakers and break some. Also future reference if you do take panels off much there is a tool you can get thats really cheap as...

If your looking for a cheaper set up there are ways to go. Cheapest for better stopping. Upgrade just rotor to cross drilled or slotted. Several different patterns. This will dissipate heat better even with same size brake pads and increase stopping power. More expensive upgrade to a larger...

I roll on 23's and i never had any issues with stopping power either. If your not wanting to increase the size of both your rotors and your pads then go with something that will help. Get slotted, cross drilled, or both slotted and cross drilled rotors. These will dissipate heat better and...

You need a line output converter in order to install it into your factory head unit. Honestly if your using subs your not gonna notice all this (noise) everyone is talking about. If you have good subs and the beat up then your not gonna notice anything. Install it into your rear speakers and...

Thanks i appriciate the help. I got the local guys at a shop i go to whenever i cant do a job or dont have the time. They are going to do it for $40 plus the part $10 (which i already have) If it were warm out i might mess with it is 20 as a high and we are suppose to get 6+ inches of snow...

How did you get to yours. I messed with it over the weekend and if i moved it and pushed the brakes they worked fine. I saw the retainer clip. I just cant fit my hands let alone any tools up there to get to it. Did you have to drop the steering column? Info would be greatly appriciated

I have this same problem on my 99 right now. How hard is it to replace the switch? I could barely get my hands to it let alone take it out. Do i have to lower the steering column and go in from the top? I am looking to do it soon so i really could use some insight

My brake lights dont work. If i barely touch the pedal the lights will come on and stay on. If i push it hard like to brake then they just flash on quick and go off. I am 100% sure it is the Brake light switch. My question is how do i replace it. It is above the pedal and back in behind the...

How can you say that cleaning them out has no effect and that you should just take it off all together to gain anything. Cleaning them out is the exact same as taking it off. All you do is put the shell back up there, if you take it off what are you putting back up there. A new piece with no...

What i did was all this math stuff and then i just basically checked to see how much room there was with the wheel turned both directions from the inside fender. Then since i knew how much larger the other set was gonig to be checked to see if 2 inches more was going to rub. I dont have as...

I dont see why not. I have on mine now 305/40/23 from stock. I have a 99 Tahoe 4dr 4wd. I believe i had already on there 265/60/16.