Recent content by kredfearn

OK I have the GM Lock pick Pro installed with a backup camera up front. Works fine except the image is reversed. I read somewhere that there is a green wire inside the camera cable that gets cut to correct the image. So i spliced mine open and there is no green wire just red, black and yellow...

It should. You might need to do this---> http://www.ebay.com/gds/How-to-Reprogram-Relearn-Chevy-Tahoe-07-Up-Remote-Key-/10000000176238819/g.html

I had to take mine to the shop to have the axle nuts broke loose. Cost $60 for 5 minute job but it was well worth it!

Parts ordered and should be in on the 19th. First time working on a Tahoe so are there any tips, tricks or anything I should made be aware of when replacing the hub assemblies?? BTW mine is the 07 Tahoe LTZ.

My badd where the heck are my manners... Thank you AZSCTACO!

Checked things out yesterday after work and it was the front passenger side bearing. Drivers side was OK but I'm going to change both just to be safe.

Need some help here!!! I have a grinding noise that just started yesterday coming back from a trip to Galveston. Had no problems on the trip down. On the trip back we got about 20 miles from home when it started. Did it twice on the interstate for a short time then stopped. Got off on our exit...

Here She Is 2007 Tahoe LTZ 4x4 Fully loaded Fabtech 6" lift 35x12.50 Pro Comp Extreme A/T's 18" Chrome American Racing ATX Series

look at the fuel filler cap. It should say there.

NEVER MIND I figured it out! Just pull it out from the bottom first then the top top.:rolleyes:

Go with the 07:peace:

Hey guys, I just bought a 2007 Tahoe and was wondering how to remove the headlight switch from the dash. I didn't notice it when i drove off the lot but it looks like the previous owner had pushed it in because its sitting at an angle. The knob wont turn in either direction because of the...

Hey guys thanks for your opinions...I’m kind of leaning toward the 6" Superlift system. If I’ve been reading the installation instructions from the web site right there are only 4 things you need to modify on the Yukon chassis. I can't remember where I ran across this but I thought I saw a bolt...

Hey thanks for the info. That would be a whole lot cheaper then buying a new head unit to hook up my amp.

Is it possable to hook up an external amp to a factory radio in a 99 yukon?