Recent content by TravisH

Would this be the generally same procedure on a 2000?

I'm glad this post is still kickin around. I've done a few more things to my truck lately and will have to post them soon.

I work at a car audio shop myself. Yellow top is a deep cycle battery and meant to be drained and recharged. A starter battery can be drained only a few times before it is junk. I'm not saying you can't put a deep cycle battery under the hood but why would you drain your main battery you use...

I wouldn't put a Yellow top under the hood because that's not what it is meant for. You want a red top under the hood.

http://www.tahoeforum.com/showthread.php?p=45929#post45929

You may also want to keep an eye on this thread. http://tahoeforum.com/showthread.php?t=5852

Normally you don't have to reprogram but something may have happened. Sounds like it may have lost programming. Not sure if you can do it on your own or just run to a dealership quick and have them reprogram. Only other thing I can think of is by coincidence, the battery in your key fob went...

I only wanted the auto headlights to not come on when I remote start so I made a circuit with the information using a relay. This is how to do it. 86 - Ground out when running from Remote Start 85 - +12 Volts 87 - Gray or white wire from BCM 30 - 1.5k Ohm Resistor and gray or white wire...

Thanks for the info.

Only a temporary installation until I have time for something more permanent. I traded a 4 door tint job at work for it. PC/Screen/GPS Receiver. Not a bad deal. Sorry for crappy pics from cellphone.

Or you can go to auto zone and get the cheap door handle covers for $11.99/pair.

i know about the override switch but i don't want to press it 4 times and then 4 times again. Thanks JK, let me know what you find.

I put the key in the ignition and the headlights come on and when you crank, they turn off for a split second and sometimes one doesn't or they both don't come back on. Anyone find a work-a-round for this? THanks, Travis

You aren't going to notice much of a difference either way you go when you are using it for a subwoofer. High level input would be just fine.

and the finished product