Recent content by XenonDepot

Hi, Projectors definitely offer a crisper cut off than your OE halogens however the problem is that sometimes the quality of the projectors is not the greatest (just being honest). If your truck has a decent cut off with the stock headlights I would go with an HID kit using your stock...

Hi, It really depends on the quality of the aftermarket projector that you put in. Does your vehicle have the sealed beam headlight or the one that has the 9006/9005 setup. Steve

Hey, The aftermarket headlights use an H1 bulb. You would need to get an H1 HID conversion kit. In some cases you slightly need to modify the bulb opening on the headlight as an H1 HID bulb is slightly thicker in diameter than a halogen H1 bulb. Steve

Hi, I'm not saying that they will fail 100%. I am just staying that the failure rate was significantly higher than the products that we sell. Steve

Hi, We have tried all 3 of these kits. 1) Flexibulb - Mechanism will fail. 2) Their "True Bi-xenon option" Either the low or high beam bulb will fail as it is highly stressful on the bulbs to be turned on/off repeatedly ie: flashing people. This is why cars that come with OEM Bi-xenon...

Hi, The mechanism. One bulb will end up getting stuck in either low or high beam. Steve

Hi, I would not suggest upgrading your stock fogs to HID as your OEM halogen fog light bulbs are 35W. We do sell performance halogen bulbs though for your fog lights. Please view this link: http://www.kbcarstuff.com/GM_FOG_LIGHT_BULB_H16_9009_Putco_GM_Fog_Lamp_Bulb_p/230001.htm Steve

Hi, You can technically get a high/low H13 HID kit however the H13 HID kits that we sell are low beam only. We have found that the H13 high/low kits currently available in the market are prone to failure. Steve

Sure! When you are ready, please send me a PM with your phone number and I will give you a call to discuss! Steve

Congratulations to T Phan - Winner of our 3rd HID Drawing!! One more kit to give away =)

Glad to hear it buddy!!! If you take any pictures please post them up so that we can take a look. Let me know when you are ready to place an order for your other car and I will do my best to help you out! Steve

Hi, Unfortunately I do not have any DIY instructions for the 04 Yukon however I would be more than happy to give you a call to answer any questions you may have. Just sent me PM with your contact info. Steve

Hi, Please view this link: http://www.kbcarstuff.com/Chevrolet_Tahoe_2007_H11_Xtreme_HID_Conversion_Kit_s/207.htm Steve

Glad to hear it! Will ship out your kit right away. Let me know if you have any questions in regards to installations. Did you see the DIY we have on our website for the Tahoe? Steve

Hi, The Xtreme kit would be $174.99 once you use the TF coupon code. I personally would not suggest upgrading the high beams on your vehicle for twp reasons: 1) HID bulbs take a moment to fully ignite and reach their desired light output. In situations where you need to flash someone...