Search results

  1. bowtiefreak

    Where to buy differential drop brackets 99 Tahoe

    What brand lift is it? Contact the manufacturer or try ebay or craigs list
  2. bowtiefreak

    Newbie to the forums! 97 Yukon GT. Any advice will help!

    Nice truck. Do the brake upgrade. Maybe new shocks if it needs them too.
  3. bowtiefreak

    sensor in the column

    I have had three put in my truck over the years, ever done it myself but I hear it is not so bad to do.
  4. bowtiefreak

    Should i trade my truck for?

    keep the 2 door! The other truck is nice but I must agree it is too good to be true.
  5. bowtiefreak

    K&N FIPK II Intake

    I've got one, nice unit. Can't say it is worth the money though. There are lower cost units out there that are just as good (volant and so on).
  6. bowtiefreak

    murderedout 07rims

    I love the dark rims. I got a set of the AR teflon coated and they match the grey on my truck perfectly.
  7. bowtiefreak

    Finally bought a Tahoe!

    Nice rig! I need a super charger.
  8. bowtiefreak

    Got my new lift done!!! PICS!!

    A little bit, I am going to do a little trimming. Your tires are a bit larger than mine too.
  9. bowtiefreak

    Got my new lift done!!! PICS!!

    I need to get some action pictures up here. I am yet to get this thing out and see it flex
  10. bowtiefreak

    3" pro comp lift blocks

    summit isn't bad. Tappered is the way to go to keep the driveline angle correct and vibration at a minimum. You can always put a shim in for like $10
  11. bowtiefreak

    2-2.5" skyjacker suspension lift

    I think Rancho makes a 4" kit. Think about it a lot before you lift it...make sure you will be happy with a smaller lift like that. I almost went with a smaller lift and turns out I am much happier with the larger lift. Also keep in mind the hidden expenses when lifting...brakelines, gears if...
  12. bowtiefreak

    ????wtf????

    Get an alignmenet. That is the first place to start, also double check the blocks and make sure the tapers go the same way and the u bolts are tight.
  13. bowtiefreak

    stock gears with 35's??

    Regear. I have a strong motor in mine and it is a bit on teh sluggish side with 35's and 3.73 gears. I am going to swap to a 4.56 or 4.88...leaning towards the 4.88 :)
  14. bowtiefreak

    Need to lift my 97 tahoe any ideas???

    A knuckle lift will also stick the front tires out farther than the rears
  15. bowtiefreak

    2 door rear drive shaft question

    I ordered my new CV Shaft last night, hopefully I get it before Thanksgiving. Install is about 25 minutes. I am so excited. I'll keep you all posted. Next project 4.88 gears!
  16. bowtiefreak

    First time lifter...need recommendations

    There are a few good kits out there for the OBS tahoes. Rancho, Procomp, and dick Cepek / Extreme suspensions are are good choices. As for tires, 35" is a good choice
  17. bowtiefreak

    Need to lift my 97 tahoe any ideas???

    Procomp, Dick Cepek / Extreme, and Rancho are all good kits. I would advise to go with a full drop kit. What are you going to do with the truck, this will help point you in the right direction. If it will be a street truck only a lighter duty kit will work, hard offroad you will need a really...
  18. bowtiefreak

    2 door rear drive shaft question

    There are a lot of DD trucks out there running these. Some trucks even came from the factory with them. I am looking into the warranty too. I am keeping my old shaft and will have it extended accordingly at some point also to see the difference in teh two. I am sure it is the driveshaft...
  19. bowtiefreak

    2 door rear drive shaft question

    No I don't have autotrac. The front shaft is ok, plus it only spins when engauged in 4 wheel. As for the rear, I am at a loss for the most part. I get a good vibration and the local driveline shops around here all recomend the double cardan. This is why I am so confused. I do get a...
Top