Search results

Naw keep it clean no fuel door. Check out www.streetsceneeq.com for some roll pans sir michaels makes good stuff too.

I'll check for you next week to see how much they run, really nice coilovers made by KW (audi, vw, etc). Just installing my bilstein shocks right now but I managed to get some pics of the bags installed. I'm hoping the truck rides better after the shocks since I'll have a service ride control...

Roll pan but keep the fuel door stock. Get some new led tails and have the shop smoke them, I love mine and they're still bright as hell.

Sucks you were tboned, might be god's way of telling you not to put lambo doors on your truck

Paid $191.17+ tax for mine a year and a half ago.

With stock brakes and 300lb wheel/tire combos.

Bilstein shocks or I can sell you this ill belltech coilover: The helper bags are really easy as long as you don't fvck up like I did. I'm confident I could install another set in 30min.

Finished it up on my lunch today, sorry no pics. Used my alignment rack so I could adjust ride height thus aiding in the proper connection of the air lines at the top of the coil buckets. By situating the truck's height I was able to position the bag in the partially compressed coil spring and...

Due to the lack of oxygen you can run a lower octane up here, I always fill with 91 or higher cuz the truck will run much better. Costco gas ftw.

I love my 6000k, especially the fogs.

What size wheel and what kind of lift? Body lift? I'd get some 315/70/17 pro comp extreme mt they're smaller than a true 35x1250 and should fit with the body lift and a slight crank of the tbars.

love my tune, best thing I could have done for my truck.

wtf I have awd with a bigger engine and managed 340 from the last tank with several wot runs past 100. something isn't right you should be getting 14 or better.

not running a controller, i've got bigger plans down the road that involves a belt driven compressor and 1/2" valves. I'll have a review tomorrow, hoping it's money well spent although they really didn't cost much. just rockin the single shraeder valve that came with the kit although I am...

Well I finally got around to attempting the free travel mod on my truck but before I started cutting and grinding away I noticed my exhaust has been contacting the axle housing. Seems like magnaflow should have bent the pipe higher after the muffler otherwise it will contact the axle under...

You may find more info in the older section since your truck is the same body style. I had a limited that I sold to a buddy

Check all your connections, mass air sensor, plug wires, everything. 100s of people have done the same mods with exceptional results.

Smallest wheel I run on this truck is a 20, gonna have to once I get the brakes on. My stockers are 17" as well as the spare and I sold them for $500 almost a year ago.

Yes anytime you alter the steering you have to re-align the truck. Even if the wheel looks straight the caster split will be way off as well as the camber, toe, etc. Most places should charger $50-$80 for alignment, I'm doing spindles and just decranking the drop keys every spring and pegging...

Nice find, I love the fr500s almost as much as chrome ccws on those cars. Hellion kit is fvcking bad, you gonna ditch the irs and t56? Both vehicles look dope, looks like you could clear some 35s no problem.