Search results

  1. P

    O2 Sensor Female Connector

    Anyone replaced, or know where to get the replacements, for the female connectors for the O2 Sensors - the ones on the actual wiring harness? I found the Bank 1 & Bank 2 # 2 Female connectors to splice in, but I cannot find the one for the #1 Sensors. Suggestions?
  2. P

    PPV Police Tahoe Shocks

    Thanks. The dealer kept trying to tell me that the PPV vehicles took special shocks and I could only get the through GM. I know it's lowered, but I figured there had to be replacements available.
  3. P

    PPV Police Tahoe Shocks

    Are these the AC Delco OEM numbers?
  4. P

    Exhaust Manifold replacement

    Yeh I got tired of trying to make sure the front driver's side bolt was all out. I pulled the heads and took it to a shop for a valve job. They ended up Heil-coiling the front bolt. Everything has been bolted back up and changed over to Doug Thorley Headers - heavier bolts now. Should be...
  5. P

    PPV Police Tahoe Shocks

    Any one know the GM part #'s for these police version shocks? I called a couple of dealers but they won't give up anything. AC delco part numbers are fine.
  6. P

    PPV Police Tahoe Shocks

    Anyone know the package for the police version shocks? I have an 06 PPV and am trying to replace the shocks, but it's hard without know the OEM part numbers to cross-reference.
  7. P

    to purchase or not to purchase 04 z71 135K

    I would also look under the hood and see it there are any exhaust manifold bolts sheared or broken off. Since this is a common problem on the vehicles, it could be a cheap fix (couple hundred dollars), to having to pull the heads and having the bolt holes re-tapped. I just purchased an 06...
  8. P

    Rocker Bolts Torque Sequence

    Question; I was torquing down my rocker bolts in the sequence spelled out in the tech. manual - 06 Hoe 5.3L After rotating the crank to finish the final 8 bolts, I realized I missed the #2 exhaust bolt - when it was at TDC. I went ahead and torqued it down to 22ft/lbs, but will this throw...
  9. P

    Exhaust Manifold replacement

    I got lucky on the bolts by #7 & # 8 - if you want to call it luck. I was able to get a pair of small channel locks on the bolts and work them out. Of course, I had to remove the fire-wall metal and a bunch of other crap. The bolt above # 1, not so lucky - it was sheared. I tried the...
  10. P

    Exhaust Manifold replacement

    Since I just found out about the overwhelming problem GM has with the exhaust manifold bolts shearing off in the heads, I now need to replace my manifolds. My 06 has only 59k miles on it, and three bolts sheared off - #1, #7, & #8. It's amazing that GM knows about this huge problem and won't...
  11. P

    Exhaust Manifold replacement

    Since I just found out about the overwhelming problem GM has with the exhaust manifold bolts shearing off in the heads, I now need to replace my manifolds. My 06 has only 59k miles on it, and three bolts sheared off - #1, #7, & #8. It's amazing that GM knows about this huge problem and won't...
  12. P

    Plug Wire Question

    Good Talk
  13. P

    Plug Wire Question

    Anyone have preferences for replacement wires on the 5.3L? I am going to replace the plugs with AC Delco 41-110 for now, and I have a code for a front o2 sensor - so mine as well replace the wires as well. I just purchased an 06 PPV (59K miles) and I am looking forward to this forum - as...
Top