CCM 2.5" leveling kit installation question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

oRAirwolf

New Member
Joined
Aug 19, 2015
Messages
13
Reaction score
0
Location
Denver, CO
I just received the CCM 2.5" and was reading through the instructions. I am a little confused because on the product page, it says "Vehicle can be put back to stock, nothing is permanent." This is one of the reasons I decided to go ahead with the kit. Now when looking at the instructions, step 10 says "With a hacksaw or other cutting tool, cut the studs so they are flush with or just below the new upper mount." That sounds pretty permanent to me :p

Can somebody who has installed this kit weigh in on this? Will I need to cut any studs?

Kit Page: http://www.ccmoffroad.com/2007-2015-chevy-tahoe-gmc-yukon-2-5-leveling-lift-kit/
Instructions: http://www.ccmoffroad.com/2007-2014-gm-suv-lift-kit-ccm071500-suv/
 

oRAirwolf

New Member
Joined
Aug 19, 2015
Messages
13
Reaction score
0
Location
Denver, CO
So I got the kit installed today and talked to CCM beforehand. The front spacer requires that you cut down the studs, but it leaves enough stud behind that you can still remove the spacer if you need go back to stock.
 

Redreid23

New Member
Joined
Jan 28, 2017
Messages
3
Reaction score
0
What size tires are you guys running? I want to level mine but want to make sure it will still fit in the garage.
 
Top