Hi Ron,
I have issues with my Tahoe LT 2004
I just replaced my HVAC actuator heater blend door for the passenger side, with number 07 here in the picture. It was a hell of a job to get this thing out as it is the top one in the dash directly under the ventilation ducts. I placed a photo shoot on...
Hi,
I recently changed my driver seat foam and cover of my Tahoe 2004 LT. I knew my heating pad was damaged so i changed that one too, thinking to have a nice warm ass this coming Norwegian winter.
However after installing my seat back in the truck, noticed the heating is still not working...
Hi Keygun, i see this is now more than a year ago posted, but just curious as i have the same problem right now.
We dropped the oil pan and checked the seal on the oil pickup pipe. That was was o.k. the oil pump is also ok but was not ok is the camshaft alignment. we could see this was was 3mm...
Hi Ned,
I am also very interested in a build sheet of my truck.
here's my VIN# 1GNEK13T14J316235
My Email: [email protected]
Thanks a lot, much appreciated
:)
Hello PNW NBS Z71,
Thank you for your reply in this matter.
In the meantime i did find it indeed on the frame, right side location exactly under the middle of the passenger front door.
I cleared already approx 60cm of Mercasol coating from the frame, which took me more then an hour to dissolve...
Hi,
I have a chevy Tahoe LT 2004, live in Norway and now with the EU control they want me to show the stamped VIN or chassis number on the frame.
However i cant find it on the place on the frame under the passenger site.
I read also somewhere that this was located on a big white sticker?? ...and...
yep, there is a difference, i do not have that fuse. Think some is wrong with my button, as it is working now and then. Will try to order new one and see how to program it.
Hi Pewter,
I reading your post here, and see you had success by taking out the DSM fuse for 20 sec.
I have a Tahoe from 2004, and since yesterday also a problem with my remote keyless entry. In this case I cannot open the doors anymore. The locking and alarm buttons work quite fine.
Now...
Right, i see what you mean. Apparently i have also a different mounting of mine, since on my truck they are assembled with a bolt straight through the bumper, but fastened into a metal clip with fixed nut on it. The clip slides over the edge or side of the bumper and that s it. Can't you not...
Mine, LT 2004, has 77k on the clock. Apart from bit rust, not so strange in these northern countries, and A/C system down, no problems at all. Big great Truck!
Hi Silky, yes it is easy actually the bolts are not pressed inn, but merely inserted.
When you tried to loosen up the nut on the bolt-pin, the whole pin started to turn and forced itself in the sidewalls of the plastic. I had the same problem. You can easily turn the pin back a bit with a...
Hi Here is something you need to do to get that feature back:
Automatic Unlocking
Press the personalization button on the steering wheel until AUTOMATIC
UNLOCKING appears in the display. To select
your personalization for automatic unlocking, press the
select button while AUTOMATIC UNLOCKING is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.