ABS and Brake light on

[Mr45]

Noticed on two occasions last week, that the left front brake was acting weird when I came to a stop; almost like the ABS was messing with it.

Now, intermittently, I get the ABS and Brake warning light on startup, other times I don't.

Is the ABS sensor going bad? Are they tough to change out, and how much are they?

 

[Mr45]

Nobody?

 

[XcesiveSlyd]

Search for it. I searched google. I also had the ABS prematurely activating. It was a sticking caliper the first time. The second was because I wheel a lot the sensor had some grime/rust/dirt on it and it needed to be cleaned.

 

[tspain]

Also, check to make sure the hub bearing isn't going out. (Excessive slack back and forth) They are bad about getting to much slack and having to much play causing a clearance issue between the sensor and reluctor ring inside the hub.

 

[greengumby]

Also, check to make sure the hub bearing isn't going out. (Excessive slack back and forth) They are bad about getting to much slack and having to much play causing a clearance issue between the sensor and reluctor ring inside the hub.

X2.... and also Was a physical inspection done yet? i see alot of problems can be solved just by taking a look under and seeing...my abs wire was broken and had to replace the entire unit ..one piece

 

[Mr45]

Well, we read out the error code, and it's the EBCM unit itself that's going bad.
Dammit.