Hesitation on take off

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

devilblue14

New Member
Joined
Jul 30, 2008
Messages
2
Reaction score
0
Location
Longview, TX
I'm a new owner of a 99 yukon slt with 112k on it. It is hesitating on take off. I replaced the fuel filter which did not help. I do not have a CEL on. Maybe injectors? Anybody have any suggestions? Thanks.
 

klennop

New Member
Joined
Jul 31, 2008
Messages
15
Reaction score
0
Try cleaning your MAF sensor (BE CAREFUL!). Otherwise you can also put a ton of fuel injector cleaner through it.
 

qlc1964

Full Access Member
Joined
Sep 3, 2006
Messages
233
Reaction score
0
Location
st.louis mo.
you should have a code that will come up with all them sensors on that motor
 

klennop

New Member
Joined
Jul 31, 2008
Messages
15
Reaction score
0
you should have a code that will come up with all them sensors on that motor

Mine didn't show any codes at all and I was having the same issue.

I cleaned my MAF, did a full tune up and ran a ton of fuel injector cleaner through it and now it runs like a champ!
 

YukonJenNV

New Member
Joined
Sep 13, 2008
Messages
3
Reaction score
0
Location
Northern California
I am having a similar problem. My Yukon is also hesitating at take off, and also popping at wide open throttle. I replaced all four O2 sensors, and it ran better, but I am still getting a P702, and P704 code. My parts buddy is thinking I need to replace my catalitic converter. Anybody else getting these codes?
 
Top