jl1288
New Member
Hello guys,
I could use some advice. I put a pair of McGaughys 2in drop springs in the rear of my 07 Tahoe and now my message center is scrolling the following messages:
service traction control; service stabilitrak; stabilitrak off ; traction control off.
Ive also got the ABS light illuminated and the traction control light is illuminated.
I neglected to disconnect the battery prior to installing the rear springs and new shocks, any advice/guidance is much appreciated. Thanks, John
ETA.
While removing the passenger side upper shock nut I accidentally dis-connected the data cable that sends info from the speed sensors mounted in the axle.
I could use some advice. I put a pair of McGaughys 2in drop springs in the rear of my 07 Tahoe and now my message center is scrolling the following messages:
service traction control; service stabilitrak; stabilitrak off ; traction control off.
Ive also got the ABS light illuminated and the traction control light is illuminated.
I neglected to disconnect the battery prior to installing the rear springs and new shocks, any advice/guidance is much appreciated. Thanks, John
ETA.
While removing the passenger side upper shock nut I accidentally dis-connected the data cable that sends info from the speed sensors mounted in the axle.
Last edited: