YukonJacks
Full Access Member
Just got my lights today, Thought it would be in and out. Heres my delema.
I have 4 wires coming from in the housing, 2 red aqnd 2 white. They go to a small black box filled with epoxy, and 3m sticky back tape and two red wires come out the other end.
Now the low beam is simple enough the existing plug goes right to the bulb.
Now coming off the high beam bulb a black and red wire are plugged into the bulb and on the other end is a female plug end similar the female plug end that is at the end of a bulb.
I have no Idea what plugs into this
Any help will be greatly appreciated
I have 4 wires coming from in the housing, 2 red aqnd 2 white. They go to a small black box filled with epoxy, and 3m sticky back tape and two red wires come out the other end.
Now the low beam is simple enough the existing plug goes right to the bulb.
Now coming off the high beam bulb a black and red wire are plugged into the bulb and on the other end is a female plug end similar the female plug end that is at the end of a bulb.
I have no Idea what plugs into this
Any help will be greatly appreciated
