Recent content by kingkon

kingkon

I had a djm kit 3/5 on 22's. Front ride was ok but the back was not so good. Went to a Mcgaughey 3/5 kit on 22's. Front rides about the same as the djm but the back rides better. I personally think the best mild drop for these suv's are the 2/3 by Mcgaughey. Its a front spindle with the stock...

it has to be the alignment. To much air wears the middle and to little air wears the outsides of the tire

the cable tends to stretch. you can adjust it on the driver side with 2 wrenches

bad advice... do it the correct way and buy control arms or drop spindles I ha a set of 2" mcgraughy drop spindles if you are interested ( brand new ) pm me if interested. 2/3 is definetly the way to go to get a little lower stance and keep the quality ride.

8'S or 10's for a door????? Little big would ya say. A good quality 5.25 component would of been more than enough set up correctly.. or if you just wanted it custom with fiberglass (2) 5.25 components would have been good. just my opinion. Good luck

Also thier is a specefic cleaner for MAF sensors so if you want to go that route good luck.

I cleaned the throttle body with the seafoam "deep creep" . It removed tons of soot from the tb. I did not touch the maf sensor and everything worked awesome. Good Luck

I want to thank you for the heads up on the Seafoam products. I did the treatment this weekend and it is a miracle. The erratic idle is gone and the yukon runs nice and smoothe now. It is amazing that the dealer changed a bunch of parts (thankfully under warranty) and could not find the problem...

check this link before you go and print it out. It is for gmpart direct. http://www.gmpartsdirect.com/catalog/frameset.cfm good luck

I like the top wheel in a 22. With a 3/5 drop it will fill up the wheel well just fine w/ a 40 series tire

will try it today. Thanks

hello to all. I am new to this forum and this is my last stop to find info on a problem I am having. My 2000 yukon (new body style) has a problem with the idle. Mainly when the ac is on the idle goes up and down as the compressor kicks on and off. It also does it when thier is nothing on. I was...