Hi all,
I bought a 03 4X4 Tahoe some time back the Tranny seemed a bit sluggish shifting form 2nd to 3rd.I decided to change the tranny oil,filter and after much reading the A and B solenoid as well.I also wanted to replace the OE Servo with the Corvette Servo everything i read and watched online lead me to believe this was a fairly straight forward task.I need about an 1/8" or less to remove the darn thing.I can almost get it all of the way out but it hits the tunnel.My question is can i pull the retaining clip and take the first part off, have others run into this issue? I believe once i do that i should be able to remove the back half along with the shaft.
Any help would be great
Thanks in advance
I bought a 03 4X4 Tahoe some time back the Tranny seemed a bit sluggish shifting form 2nd to 3rd.I decided to change the tranny oil,filter and after much reading the A and B solenoid as well.I also wanted to replace the OE Servo with the Corvette Servo everything i read and watched online lead me to believe this was a fairly straight forward task.I need about an 1/8" or less to remove the darn thing.I can almost get it all of the way out but it hits the tunnel.My question is can i pull the retaining clip and take the first part off, have others run into this issue? I believe once i do that i should be able to remove the back half along with the shaft.
Any help would be great
Thanks in advance