Question on Duel Exhaust Setup!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DarkTahoe00

Full Access Member
Joined
Dec 1, 2007
Messages
259
Reaction score
0
Location
IN
I purchase a Flowmaster singal in duel out so I went to the local
exhaust shop to see how much it would be to run and they told me
$150 to do it but here's the kicker the way they were gonna run it
they said I would'nt be able to lower the Hoe because the way they're gonna run
the left side I would'nt have room for it if I did and the only other way is to drop
the spare for good and it run that way! So has anyone else run in to this problem?
I i'm running it straight out the back! Any input will help! Thanks!
 
Last edited:

DarkTahoe00

Full Access Member
Joined
Dec 1, 2007
Messages
259
Reaction score
0
Location
IN
So i Take it no one as ran into this problem on here?
I'm taking it in on monday to have it done and I need to hear
some feedback on this so I can tell them which way to run it! Thanks!
 

hoser

New Member
Joined
Aug 21, 2008
Messages
47
Reaction score
0
It seems to me your going to give up a lot to gain what?

Cost of the exhaust system + 150 bux to install + no spare tire + unable to lower your ride = ? another 15 mpg? Sounds like a indy car ?
 

DarkTahoe00

Full Access Member
Joined
Dec 1, 2007
Messages
259
Reaction score
0
Location
IN
I hear ya thats why I needed some input on this cuz I know
i've seen other trucks on here run there duels out the back!
I just wanted to see how there doin there's! Thanks Hoser for the reply!
 

CHISTOSO

Full Access Member
Joined
May 9, 2007
Messages
191
Reaction score
0
Location
Tempe, Arizona
I was told the same by shops. I have a single exhaust and mine is lowered 5 inches out rear. I just bought a bunch of mandrel bent pieces and cut 'em up and made my own. Looks like it came from the factory. Smooth and clean, it took me the better part of a saturday fitting, trimming, welding, grinding but it was well worth it. This may be what you'll have to go with unless you want to sacrifice your spare or get some shoddy pipe bending done..

Plus I left it so if I want to go duals I have the pipe already done, all I need is the single in dual out..

Spent about $80 on the pipe pieces... If this helps..
 
Top