Topdeadcenter
New Member
- Joined
- Feb 1, 2013
- Messages
- 7
- Reaction score
- 0
They say it cant be done but I did it
started with tires
then the rear end went out
still had some vibrations new ujoints and added the grease fitting on the slip yolk
noticed bad edge ware due to a bent lift
new controle arm bushings upper and lower, rotors, new cv axel,
then the bitch just died on the way home I thought it was a fuel pump but no it was the ign switch, face to palm
then on the way down the canyon she started buckin and a flashing CEL lean codes and miss fire codes random. intake was leaking from the rear of the heads.
then on the way home from moab she threw a 420 assuming that they where shot took the easy way out and hollowed them bitches out and slaped a couple o2 extenders haven't seen the code come back on.
now im fighting an 1406 egr code I replaced it and forgot about the relearn. did the relearn yesterday and I haven't seen the code come back
let me know if you have any questions I think I have ran in to most of the bull **** that these hoes try to throw at you
