engine knock

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

souhradaj360

New Member
Joined
Oct 16, 2014
Messages
2
Reaction score
0
Slight rod knock started last week. Very noticeable on cold starts, but seems to go away after warming up or higher rpm. I read a vaccume leak could cause this, anyone have any ideas? Or should I start looking for a 6.0 to swap? I can pick up a used on for $175.
 

Exgie

New Member
Joined
Oct 17, 2014
Messages
16
Reaction score
0
A vacuum leak would never cause a rod knock. There is no relationship between a rod knock and vacuum leak. If you are sure it is a rod knock and not something else. Yeah you might want to look for a motor.
 
Top