My 5.7 is running rough

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

j.serkowski

New Member
Joined
Jan 30, 2013
Messages
5
Reaction score
0
I have a 99 4x4 with a 5.7. i was diving last night and the service engine light started flashing and it developed a miss, like 1 cylinder wasn't firing. It limped home and i put new plugs and wires in it, cleaned the cap and rotor with 320 grit and it's still not running right! I was wondering what my next course of action should be. it has 153000 on it with an MSD coil, I checked the spark and it's yellow, should i change the coil and or ignition module? New cap and rotor....distributor?
 

j.serkowski

New Member
Joined
Jan 30, 2013
Messages
5
Reaction score
0
No I haven't checked the injectors yet, don't u have to take the intake off?
 

Bigbill

New Member
Joined
Aug 1, 2012
Messages
49
Reaction score
0
Location
Middletown CT
The link is to pull the entire intake not the upper plenum which is not that hard but you can put a fuel pressure gauge and see if the pressure is at spec and if it leaks down with out any trouble
 

j.serkowski

New Member
Joined
Jan 30, 2013
Messages
5
Reaction score
0
Well, luckily, I was able to replace the cap and rotor with excellent results. It's all good for now , just a simple tune up. Thank everyone for they're input though.
 
Top