putting in some trans stuff need opinions

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

notch8

Full Access Member
Joined
Sep 29, 2008
Messages
55
Reaction score
0
After looking around for a while I found a local shop that can install a vette servo for 100 including the part itself, he also said he would bump up the line pressure in the pump. What else would be a good idea to put in?

And also if the programmer i'm using is faking the pump into bumping up line pressure, and the transmission tech actually increases the pressure at the pump is that going to cause problems?
 

withac

Full Access Member
Joined
Apr 23, 2008
Messages
448
Reaction score
0
Location
Eastern Idaho
After looking around for a while I found a local shop that can install a vette servo for 100 including the part itself, he also said he would bump up the line pressure in the pump. What else would be a good idea to put in?

And also if the programmer i'm using is faking the pump into bumping up line pressure, and the transmission tech actually increases the pressure at the pump is that going to cause problems?


Dude, the part is like 15 bucks. I don't know much about tranny's so I have no idea how much time it takes to bump up the line pressure so maybe that's a good price with the labor included. Have you thought about doing the servo yourself?
 
Top