ILoveMyHoe
New Member
- Joined
- Dec 12, 2011
- Messages
- 35
- Reaction score
- 0
Just ordered fat mat, how to I remove the door panels to apply the mat to the doors? Thanks.
Removing Door Panels
- Thread starter ILoveMyHoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
clkelley
Moderator
You should have mounting screws aroung the bottom of the panel, around the handles, etc. Once they are out you should be able to pull up on the panel to remove it.
tonymac617
Full Access Member
Its funny how folks dont put their year and trim in their posts. I suppose for the most part the procedure is similar through different years, but who knows if theres that one hidden bolt that you dont catch and break something. lol
if its a 2001 and up there will be one screw on bottom of panel, One behind the door arm rest kinda hard to see and get to. Then one behind the power window and door switch you will have to remove it and then slide it up and. When you install the power switch window door lock panel back take the metal clips off and put them on the panel peace then install in much easier to install and line up. Hope this helps
tonymac617
Full Access Member
Sometimes, theres also one behind the door pull. The trim peice pops out and you can see the screw.
